No1 DPF Carbon Deep Cleaning Machine – Powerful On-Site DPF Cleaning
In this promo, we show how the No1 DPF Carbon Deep Cleaning Machine works and why it is a powerful solution for professional DPF cleaning.
The No1 DPF machine is designed for mobile on-site use. As a result, you can use it almost anywhere. The machine only needs a 220V power source, which makes it highly practical for garages, workshops, roadside service, and fleet maintenance.
How the No1 DPF Machine Works
The No1 DPF machine cleans diesel particulate filters by using heated water and pressure. In addition, the process is simple and effective.
Main features:
- 50°C heated water
- Up to 5 bar pressure
- Safe and controlled cleaning
- Deep flushing of the DPF filter
- Cleaning in both flow directions
To achieve the best result, always flush the DPF filter in two directions.
Why reverse flushing is important
First, clean the filter in one direction.
Next, disconnect the hoses.
Then, switch the inlet and outlet hoses.
After that, flush the filter again in the opposite direction.
This method removes soot, ash, and carbon deposits more effectively. Therefore, you can be much more certain that the DPF filter is truly clean.
How to Check If the DPF Filter Is Clean
The No1 DPF machine makes it easy to monitor the cleaning process.
You can check the color of the return water coming back from the filter:
- Dark or dirty water means the filter is still contaminated
- Clean water means the filter is properly cleaned
So, as long as the return water remains dirty, the DPF filter still needs more cleaning.
When to Use Chemical Treatment
Sometimes, water flushing alone is not enough. In that case, the soot and carbon deposits may be too compact inside the filter.
If this happens, you should:
- apply a chemical DPF treatment
- allow the contamination to loosen
- flush the filter again with the No1 DPF machine
This extra step often improves the final result significantly.
Important: When a DPF Filter Can No Longer Be Flushed
In some cases, cleaning is no longer possible.
If the soot particle measurement is higher than 2,000,000 particles, the DPF filter is usually too blocked or damaged to clean effectively. At that point, the internal DPF element must be replaced.
However, this does not mean you need to buy a complete new exhaust system.
Many vehicle owners are told to replace the full exhaust, which can cost between:
- €2,500 and €3,000
Fortunately, there is a better option.
At No1 DPF, we can replace the DPF element inside the original exhaust housing. As a result, the costs stay much lower, while the exhaust system performs like new again.
Why Choose the No1 DPF Carbon Deep Cleaning Machine?
The No1 DPF machine offers several important benefits.
Key benefits:
- Mobile and easy to use
- Works on-site with 220V power
- Deep DPF flushing
- Two-way cleaning for better results
- Heated water up to 50°C
- Pressure up to 5 bar
- Helps prevent unnecessary exhaust replacement
- Ideal for garages, workshops, fleets, and diesel specialists
Need Help With Your DPF Project?
If you have questions about:
- DPF cleaning
- DPF replacement
- machine operation
- technical support
- or business opportunities
please contact us anytime.
+31 617777699
Good luck with your DPF project. We are here to help.