100% Original LAUNCH Brand

We are the official LAUNCH authorized store, 100% Original.

2025 New LAUNCH X431 CR3008 PLUS OBD2 Scanner Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light battery Voltage Test

LAUNCH CR3008 PLUS is an ARM platform diagnostic tool with full OBD functions that best meet the needs of the passenger car DIY market. In addition, it can also support auxiliary functions such as data flow graphic display, battery voltage test, diagnostic fault code query, and multi-language to meet the more comprehensive needs of users.

LAUNCH CR3008 PLUS support 8 Languages

English, Portuguese, German, Japanese, Russian, Spanish, French, Italian

Full OBD2 Check–Make a Better Detection for Car Engine System!

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:

1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

On-board Monitor Test

Retrieves and displays test results for emission-related powertrain components and systems. Which is a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.

I/M One-Key Fast Check (Smog-Check)

Quick state emissions readiness check and drive cycle verification.

red-yellow-green leds and build-in speaker indicate emissions monitor status

they can also help catch intermittent problems or confirm repairs during a drive cycle.

Live Data Stream Analyse in Graph

Diagnose and monitor your vehicle performance more intuitively, helping customers better analyze abnormal parameters.

One Click DTC Lookup Library

Accurately identify car problems, avoiding blind maintenance. you don’t need to search the definition of the error code online. Go to DTC Lookup menu, and input error code, it will show the definitions.

One click check battery status

Real Time battery voltage graphing helps to Judge the state of the battery;

Lifetime free update via PC

keep updated with the latest software version

Upgrading only requires two steps
1. Download CR3008 PLUS application from LAUNCH website
2. Copy the app to CR3008 PLUS via USB cable.

LAUNCH CR3008 ODB2 Car Diagnostics Support vehicles

LAUNCH CR3008 Plus supports both 12V diesel and gasoline vehicles, as long as the car is compliant with standard OBDII/ EOBD protocols, with OBDII 16 pin diagnostic port.

American (USA) cars

Need Standard OBD2 Protocols from 2000 to now.

Such as for Chrysler, for Ford, for Buick, for Cadillac, for Chevrolet, for Dodge, for GM, For Jeep, FOR Chrysler …

European Car:

Need Standard OBD2 Protocols from 2009 to now.

Such as For Alfa romeo, for SAAB, for Acura, for Audi, for Seat, for Peugeot, For Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Citroen, for Volvo, for Fiat, for VW, for Ford, for Jaguar…

Japanese/ Korean Car:

Need Standard OBD2 Protocols from 2006 to now.

for KIA, for Isuzu, for Honda, for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota…

Chinese Car:

Need Standard OBD2 Protocols from 2009 to now

for Great Wall, for Huachen, Geely, for DF Honda, for Lifan, ect …

Warning Notice

Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.

Parameters of LAUNCH CR3008 PLUS

Screen: 2.8inch
Interface: OBD2
Diagnostic equipment size: about 165*92*35mm
Outer carton size: about 171*233*50mm
Weight: <360G
Storage temperature: -20~ 70 ℃
Working temperature: -10 ~50 ℃

Items Pictures of LAUNCH CR3008 Plus