ANCEL ECHO Bi-directional OBD2 Scanner Bluetooth Car All System for iOS Android Automotive Code Reader Bluetooth Diagnostic Scan

About this item

 PINPOINT WHAT’S WRONG – Run a full-system scan in minutes with the Ancel Echo obd2 code reader, covering engine, ABS, Airbag, Transmission, and more. Receive instant feedback on fault codes across all modules, understand your vehicle with ease. Now featuring bidirectional test, you can check the subsystem and component status, verify root cause of issues, and detect the potential problems early.

    REPAIR YOUR CAR WITH LESS HEADACHE – Each fault code comes with a clear definition, cause, and repair suggestion—you don’t need to be a car expert to understand. Skip unnecessary trips to the repair shop, gain fast solutions with the Ancel Echo car diagnostic tool, ensure your car gets the right fixes.

 REAL-TIME DATA DISPLAY – Unlike many diagnostic scanners with limited data streams, ANCEL Echo provides real-time data access across all systems, including transmission (fluid temperature, gear status, input/output RPM), brake system (fluid pressure), and BCM (battery voltage), etc. Combine multiple parameters into graphs for intuitive monitoring, enabling a clearer view of your vehicle’s condition and analysis of any abnormal data.

 3 HOT RESET FOR REGULAR MAINTENANCE – The current version has launched 3 hot special features: Oil Reset, Battery Registration, and Brake Reset. These features make it easier for car owners to perform necessary maintenance and upkeep, ensuring your vehicles remain in optimal condition, extending the lifespan of their vehicles, and preventing common issues and problems. More features will be released progressively.

 FULL OBDII FUNCTIONS & OBDII GAUGE DISPLAY – Equipped with comprehensive OBDII functions, Ancel Echo obd2 scanner diagnostic tool allows you to monitor and diagnose engine and emission-related components. It helps car owners detect engine issues, improve fuel efficiency, and ensure their vehicles meet emission standards. Additionally, Ancel Echo can transform your phone or tablet into an OBDII gauge display, allowing you to customize the display of OBDII parameters according to your needs.

 COMPATIBLE WITH THIRD-PARTY APPS – Ancel Echo is compatible with dozens of third-party apps such as OBDFUSION, Torque, DashCommand, FORScan, OBD Auto Doctor, and Harry’s Lap Timer to unlocks enhanced performance, fuel savings, vehicle settings customization, and more. Whether you’re a car owner or an automotive DIY enthusiast, owning an Ancel Echo allows you to explore a wide range of professional car diagnostics features.

 YOUR RELIABLE DRIVING ASSISTANT – Beyond its enhanced car diagnostic capabilities, Ancel Echo car scanner offers user-friendly additional features designed for car owners: 1) Safety Driving Alerts, including speed warnings (range 0 to 225 mph) and coolant temperature warnings (range -40°F to 210°F), ensuring a safer driving experience. 2) Real-Time Fuel Prices, automatically searches for nearby gas station prices and recommends the cost-effective options, saving you time on your search.

Bi-Directional Control Test

Bi-directional control performs individual tests for single actuators to know if the actuator functions well, including Sunroofs, Fuel Injectors, Seats, Wipers, and more, helping users to decide whether it is a circuit fault, control unit or implementing unit.

With bidirectional scan, ArtiDiag Pro V2.0 can send command directly to E-CU to control the implementing unit to perform corresponding function, such as lift or roll down the sunroofs, turn on/off light or air conditioner, thus users can locate the problems more accurately.

3 Maintenance Functions 

*EPB (Electronic Parking Brake) Reset: to deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement .

*Oil Service Reset: allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.

 BMS Reset: register the battery after replacement.

All Systems scan & diagnostic 

The diagnostic scan tool thinksafe will give your car a full detection since it can read/clear DTCs and view live data, and service functions for ALL Systems,For instance: 

Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ D.PF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics, ….etc.( OVER 100,0000 CAR OWNERS & MECHANICS ‘s First Choice) 

All 10 Mode OBDII/EOBD Functions for all Car Makes , lifetime free

Mode 1–Live Data/Data Stream shows read the real-time data stream in character.
Mode 2–Freeze Frame is a snapshot of the operating conditions at the time of an emission-related fault.
Mode 3–Read Fault Codes Option is used to read the current, pending, or permanent trouble codes.
Mode 4–Erase/Clear Codes Option allows you to clear the existing or historic trouble codes.
Mode 5–O2 Monitor Test displays oxygen sensor monitoring test results from the vehicle’s memory.
Mode 6–On-Board Monitoring Test can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Mode 7–I/M Readiness checks if the various emission-related systems on the vehicle are operating normally.
Mode 8–Component Test displays a list of components and their locations on the vehicle.
Mode 9–Vehicle Information allows you to view the relevant information of the vehicle, including VIN (Vehicle Identification Number), CID (Calibration ID), and CVN (Calibration verification number).

Package List
Ancel Echo*1
Storage Bag*1
User Manual*1
Package Box*1